Product category
武器庫門你見過嗎?想必很多人都沒有見過,武器庫門指的是嚴格按照中華人民共和國公共安全行業標準《GA/T143-1996武器庫門通用技術條件》和金融行業標準《JR/T0001-2000武器庫門》設計制造。它除具備標準型庫門的防dan功能還具有金庫門的、防潮、焰切割、防鉆、防沖擊等各種功能,常用于重要單位等機構。
下面就帶大家簡單來看下有關于武器庫門的要求與結構:
武器庫門所有的鋼鐵部分(軸承,不銹鋼零件和用于混凝土中的加強件除外)都應采取防腐措施,包括噴鍍、電鍍、噴塑、噴漆或其他等效措施。
武器庫門的基本結構為門框、門扇、日閘門、機械密碼鎖、鎖及鎖的執行機構,根據使用需要,可設定時鎖,防盜電子鎖、安全重鎖裝置,報警信號傳輸裝置,自動燈光系統,門道踏板自動升降系統等機構。
各級別的武器庫門均可按需要增設防水功能,肯有防水功能的武器庫門在受到深度不超過5m的水浸時,不應有水通過門體進入庫內.
武器庫門門框與門扇的正面周邊間隙不大于1mm,不應有可以直接窺視到門內的縫隙。
武器庫門門框、門扇的表面應平整,外表面的平面度不大于2mm,內表面的平面度不大于4mm。
武器庫門墻體應為鋼筋混凝土結構,鋼筋的直徑應在18mm以上,擺成一個具有水平方向和垂直方向的矩陣形格柵,鋼筋的間距應在250mm以?xún)?。當鋼筋格柵為兩層以上時,層與層之間柵格錯開,層距不大于120mm。安裝武器庫門的門洞處鋼筋應伸出50~80mm(底部除外),混凝土保養后,其抗壓強度不小于35Mpa。
武器庫門門框和墻體伸出的鋼筋牢固地焊接在一起,左、右兩側焊接點不之于6點,上框不少于3點,要保證門框與水平面垂直,焊后用水泥砂漿將門框和墻體間的空隙填寫實。
武器庫門門鉸鏈除應能支撐門扇的重量外,還應能進行調節,以保證門扇與門框之間的間隙符合設計要求。在不大于80N的外力作用下,門扇可靈活啟閉。
武器庫門門插舌及執行機構應運動靈活,手動暗掣在受到不大于30N的力作用下,即可將門扇鎖住或打開。
武器庫門用鎖具應有可靠的保險功能,應有國內或機構檢測標志。
每樘武器庫門至少應配置兩套相互獨立的鎖具,M級武器庫門至少應配置一套鎖和一套機械密碼鎖,對A級武器庫門至少應配置兩套機械密碼鎖;對B、C級武器庫門,至少應配置兩套機械密碼鎖和一套定時鎖。
所有級別的武器庫門,均可以配置三套機械數字密碼和一套鎖,只要將其中任意兩套的密碼對上并打開鎖,武器庫門即可開啟。
更多產品詳情、訂購請點擊(詢價留言)
聯系我們
深圳市龍電興業科技有限公司 公司地址:深圳市寶安區石巖街道應人石社區三和工業區A棟 技術支持:智慧城市網掃一掃 更多精彩
微信二維碼